【Keywords】: adhesive‑removal cleaning agent, paint remover, sealant removal, adhesive and coating stripping, water‑based adhesive remover
【Abstract】: Polymer contaminants such as paint, sealant and epoxy adhesive can hardly be removed by ordinary degreasers. Conventional solutions rely on high‑aromatic‑hydrocarbon solvents, acetone, freon and other substances, which are flammable and environmentally hazardous. CP‑26ZH is a water‑based adhesive‑removal cleaning agent featured by color‑free appearance, no flash point and biodegradability. It serves as an eco‑friendly alternative to solvent‑based adhesive‑removal products.
Sources of Adhesive‑Removal Requirements
In manufacturing industries, it is frequently required to eliminate polymer attachments on workpieces and equipment surfaces:
‑ Stripping of paint coatings and paint films
‑ Residues of sealant, epoxy adhesive and structural adhesive
‑ Paint and adhesive stripping for painting jigs and hangers
‑ Removal of film layers and tape residues
Such contaminants are polymer substances that cannot be dissolved by ordinary alkaline degreasers. Solvent‑based products are conventionally adopted for these tasks.
Pain Points of Solvent‑Based Adhesive‑Removal Solutions
Traditional adhesive‑removal products include hydrocarbon solvents with high aromatic‑hydrocarbon content, ethanol, acetone, perhalogenated freon, etc.:
‑ Flammable and explosive: Low flash point brings major safety hazards.
‑ Health hazards: High aromatic hydrocarbons and halogenated hydrocarbons are harmful to human bodies.
‑ Environmental burdens: High VOC emissions; certain halogenated hydrocarbons deplete the ozone layer; waste‑liquid treatment is difficult.
Core Features of CP‑26ZH Water‑Based Adhesive‑Removal Cleaning Agent
CP‑26ZH is a color‑free, non‑flash‑point water‑based cleaning agent for industrial adhesive removal and coating‑stripping processes:
‑ Powerful dissolving capacity: Excellent dissolving performance for polymer substances such as paint and sealant; non‑corrosive to ferrous metals.
‑ Ideal alternative: It can replace solvent‑based cleaners including high‑aromatic‑hydrocarbon‑content hydrocarbon solvents, ethanol, acetone and perhalogenated freon.
‑ Green & eco‑friendly: Phosphorus‑free and nitrite‑free with extremely low COD; waste liquid can be directly discharged into sewage‑treatment systems.
‑ Process compatibility: Applicable to immersion, ultrasonic cleaning and high‑pressure spraying cleaning.
‑ High safety: No flash point with no flammability risk during application.
Applicable scenarios: Industrial adhesive removal, coating stripping, paint stripping and sealant‑residue removal, as a substitute for solvent‑based adhesive‑removal cleaning agents.
Process Recommendations for Adhesive‑Removal Cleaning
1.Identify contaminant types: CP‑26ZH works for polymer contaminants such as paint, sealant and epoxy adhesive. Alkaline degreasers are more cost‑effective for ordinary oily soils.
2.Process selection: Immersion or ultrasonic‑assisted stripping is recommended for stubborn adhesive layers; high‑pressure spraying is available for large‑area thin‑layer residues.
3.Environmental disposal: Phosphorus‑free, nitrite‑free and ultra‑low‑COD formulation allows direct discharge into sewage‑treatment systems.
4.Material verification: Non‑corrosive to ferrous metals, safe for steel workpieces and equipment.
5.On‑site safety: Non‑flammable with no flash point. Fire‑prevention pressure in workshops is greatly reduced after replacing flammable solvents.
FAQ
Q: What contaminants can CP‑26ZH remove?
A: It delivers outstanding dissolving and stripping performance against polymer contaminants such as paint, sealant and epoxy adhesive.
Q: Can CP‑26ZH replace acetone and freon for adhesive removal?
A: Yes. CP‑26ZH is specially designed to substitute solvent‑based cleaners such as high‑aromatic‑hydrocarbon‑content hydrocarbon solvents, ethanol, acetone and perhalogenated freon. It has no flash point and provides superior environmental performance.
Q: Will adhesive‑removal cleaning agents corrode workpieces?
A: CP‑26ZH is non‑corrosive to ferrous metals and can be safely used for steel workpieces and equipment.
Q: Is CP‑26ZH eco‑friendly?
A: Yes. It is phosphorus‑free and nitrite‑free with extremely low COD. Its waste liquid can be directly fed into sewage‑treatment systems, acting as a green alternative to solvent‑based adhesive removers.
